Ultrasonic Cleaning Machine Is Used For What Kind Of Parts?
ฝากข้อความ
Ultrasonic cleaning machine is very simple, is used to clean, its application is very wide.
1>.The principle of ultrasonic cleaning
The superaudio electric energy higher than 20KHZ is transferred to bai by the transducer (vibrator) to be changed into high audio mechanical shock and passed into the cleaning solution. The ultrasonic wave is shot forward in the cleaning solution in dense and alternating intervals, causing the liquid to liu and generating tens of thousands of tiny bubbles. These bubbles form and grow from the propagating negative pressure, and close (go out) rapidly at positive pressure. The formation, growth, and rapid closure of these tiny bubbles is called cavitation. In cavitation, when bubbles close, the instantaneous high pressure of more than 100 atmospheres is formed. The continuous instantaneous high pressure is like a series of small explosions constantly hitting the surface of the object, causing the dirt on the surface and cracks of the object to peel off rapidly. This erosion is the principle of ultrasonic cleaning.
2>.In what fields can the cleaning machine be applied?
(1) Electronic industry (PCB board, electronic original device cleaning)
(2) Hardware industry (hardware parts in addition to oil and wax)
(3) Watch industry (watch parts cleaning dirt, dust)
(4) Optical industry (cleaning of optical lenses)
(5) Auto parts industry (auto parts degreasing, cleaning dirt)
(6) Precision parts industry (cleaning dust and dirt)
(7) Plastic industry (dust cleaning method dirt)
(8) Solar energy industry (cleaning solar glass panels, etc.)
3>.What are the advantages of ultrasonic cleaning machine?
(1) Because the energy of ultrasonic can penetrate tiny gaps and holes, it can be applied to the cleaning of any parts or assembly parts. When the parts to be cleaned are precision parts or assembly parts, ultrasonic cleaning is often the only way to meet its special technical requirements.
(2) Ultrasonic cleaning is much faster than conventional cleaning method in the dust removal and descaling of workpiece. Assembly can be cleaned without disassembly. Ultrasonic cleaning can save labor advantages often make it the most economical way to clean;
(3) No matter the cleaning parts are large or small, simple or complex, single or batch or in automatic flow line, the use of ultrasonic cleaning can obtain incomparable uniform cleanliness of manual cleaning.







